Factory source Edible oil safety test kit - HoneyGuard Tetracyclines Test Kit – kwinbon
Factory source Edible oil safety test kit - HoneyGuard Tetracyclines Test Kit – kwinbon Detail:
Cat. KB01009K-50T
About
This kit is used for rapid qualitative analysis of tetracyclines in honey sample.
Sample prepare method
(1) If the honey sample crystallized ,warm it in water bath not high than 60℃, till the honey sample thaw ,mix completely ,cooling as room temperature , then weight for assay.
(2) Weigh 1.0±0.05g homogenate into a 10ml polystyrene centrifuge tube, add 3ml sample extraction solution, vortex for 2min or shake it by hand until the sample is mixed completely.
Assay operations.
(1.) Take bottles needed from the kit package, take out required cards, and make proper marks. Please use these test cards within 1h after open package.
(2.) Take 100l prepared sample into the sample hole by pipette, then start the timer after liquid flow.
(3.) Incubate for 10min at room temperature.
7.LOD
| Tetracyclines |
LOD(μg/L) |
Tetracyclines |
LOD(μg/L) |
| tetracycline |
10 |
doxycycline | 15 |
| aureomycin |
20 |
oxytetracycline |
10 |
Results
There are 2 lines in the card result area, Control line and Tetracylcines Line, which are briefly sed as “B” and “T”. The test results will depend on the color of these lines. The following diagram describes the result identification.
Negative: Control line and Test line both are red and T Line is darker than the control line;
Tetracyclines Positive: Control Line is red, T Line has no color or T Line is lighter color than C line, or the T Line is the same as C Line.
Storage
2-30°C in dark dry place, do not freeze. The kit will be valid in 12 months. The lot number and expired date are printed on the package.
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Factory source Edible oil safety test kit - HoneyGuard Tetracyclines Test Kit – kwinbon , The product will supply to all over the world, such as: Norwegian, Poland, Florida, With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
By Joa from Senegal - 2017.02.18 15:54
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Doris from Italy - 2018.12.25 12:43
